Skip to main content
Schneider Electric ILM1001P01A0000

Schneider Electric ILM1001P01A0000 PacDrive 3 servo motor

MPN ILM1001P01A0000
Active

Schneider Electric PacDrive 3 ILM series servo motor, 100 mm flange, 600 W nominal output, single-turn SinCos Hiperface feedback, IP54, natural convection cooling.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1001P01A0000 specifications
ParameterValue
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP54
Length8.5 in (215 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

Why this PacDrive 3 motor in a 600 W machine

The Schneider Electric ILM1001P01A0000 is an ILM-series integrated-drive servo motor in the PacDrive 3 range. At a 600 W nominal output with 1.9 N·m nominal torque at 3000 rpm, it sits in the small-frame bracket where motion builders want compact torque without surrendering the PacDrive 3 control architecture — a sizing profile that maps to indexing tables, small-format conveyors, and packaging axis duties rather than the heavy-mill work handled by larger PacDrive frames.

Torque envelope and where it actually limits

Continuous stall torque is 2.5 N·m and peak stall torque 9.6 N·m — the peak figure is roughly five times the nominal rating, which is the burst reserve a servo needs to accelerate an inertial load before thermal limits bite. Nominal torque of 1.9 N·m at 3000 rpm sets the continuous working point; for sizing, that pair (not the peak) is what governs the steady-state mechanical output the machine designer can rely on cycle after cycle.

Current ratings and what the drive sees

Continuous stall current is 1.8 A and maximum rms current 7.4 A on a line-rated current of 1.4 A. The 7.4 A ceiling is the short-duration limit the drive will command during acceleration peaks; the 1.4 A line figure is what sizes branch protection and the upstream 24 V / DC-bus budget on the PacDrive 3 rack.

Mechanical fit on the machine

The 100 mm motor flange with a 95 mm centring collar at 3.5 mm depth and four 9 mm mounting holes follows the IEC small-frame convention; international-standard flange mounting means the motor drops onto the same footprint pattern as other 100 mm-frame servos, simplifying a retrofit into existing machine bases. Shaft diameter is 19 mm with a 40 mm usable length and a 30 mm keyway width on an untapped shaft end, with no second shaft extension and no holding brake fitted. Axial force is rated at 0.2 × Fr, and radial force Fr is 900 N at 1000 rpm dropping to 720 N at 2000 rpm and 630 N at 3000 rpm. When the motor drives a belt or pinion, the radial load derating curve is the spec the mechanical designer must check — running closer to 3000 rpm with a high pre-load shortens bearing life well before the electrical envelope is approached.

Feedback, sealing, cooling

Feedback is a single-turn absolute SinCos Hiperface encoder with 128 periods of resolution — enough for commutation and absolute position within one turn, which suits the rotary-axis work typical of PacDrive 3 machines rather than linear or multi-turn gear applications. IP54 sealing and natural convection cooling place the motor in cabinet-mounted or light-dust environments; it is not a washdown-rated or force-ventilated unit, so plan enclosure airflow accordingly.

Sourcing posture

Compliance documentation (RoHS, REACH, UL, IEC) is not carried in this evidence set and is not asserted here.

MPN
ILM1001P01A0000