Skip to main content
Schneider Electric MH30702P06A2200

Schneider Electric MH30702P06A2200 Servo Motor, 1380 W

MPN MH30702P06A2200
Active

Schneider Electric MH3 series servo motor, MH30702P06A2200, 1380 W continuous power, 5500 rpm nominal speed, 2.37 Nm nominal torque (115 V three-phase), single-turn SinCos Hiperface encoder, IP65, smooth shaft, natural convection cooling.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30702P06A2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length6.06 in (154 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

1380 W servo with 5500 rpm nominal speed

The MH30702P06A2200 is a 1380 W three-phase servo motor from the Schneider Electric MH3 series, rated for 5500 rpm nominal speed with a 8000 rpm mechanical maximum. Nominal torque output depends on the drive voltage and phase configuration: 2.37 Nm at 115 V three-phase, 2.23 Nm at 230 V single-phase, 2.01 Nm at 400 V three-phase, and 1.89 Nm at 480 V three-phase — the torque constant is 0.84 Nm/A at 120 °C copper temperature.

Single-turn Hiperface encoder and IP65 sealing

Feedback comes from a single-turn SinCos Hiperface encoder — this is an absolute position sensor that reports the shaft angle within one revolution at power-up, no homing cycle needed on the first move after a power loss. The motor carries an IP65 standard rating, meaning the housing and connector seals protect against dust ingress and low-pressure water jets from any direction — suitable for washdown environments in food processing or packaging lines where hose-down cleaning is routine.

Sizing and mechanical interface

The MH30702P06A2200 uses a 70 mm flange (IEC standard), a smooth shaft with 11 mm diameter and 23 mm engagement length, and a 60 mm centring collar with 2.5 mm depth — the mounting holes are on a 5.5 mm diameter circle. Continuous stall torque is 2.48 Nm across the 115–480 V range at 2.94 A continuous stall current; peak stall torque reaches 7.4 Nm at 9.65 A peak current for acceleration and deceleration transients.

MPN
MH30702P06A2200