It is rated DC-12 at 2 to 100 mA at 24 VDC, so it is sized for low-level DC switching in control and indication circuits, not for power loads. The 9 mm width clips onto a DIN rail, making it a single-module addition to an Acti9 distribution panel.
The DC-12 rating at 2...100 mA, 24 VDC defines the switching capability for resistive DC loads — this contact is not intended for motor or inductive switching. The 1 NO + 1 NC composition gives one changeover function for status feedback and one for fault signalling. Pollution degree 2 and tropicalisation class 2 per IEC 60947-5-1 mean it handles normal factory atmospheres with non-condensing humidity up to 93% at 40 °C. The CE mark confirms compliance for the European market.
Clip-on mounting on DIN rail, 9 mm wide — one module pitch. The bottom connection uses a spring-loaded Ti24 terminal accepting 0.5 to 1.5 mm² flexible or rigid cable, with a wire stripping length of 10 mm. The top is compatible with comb busbars and distribution blocks. A mechanical indicator provides local signalling of contact position.