Skip to main content
Schneider Electric A9A26898

Schneider Electric A9A26898 iOF+SD 24 Auxiliary Contact, 1 N

MPN A9A26898
Active

Schneider Electric Acti9 iOF+SD 24 auxiliary contact, 1 NO + 1 NC, DC-12 2...100 mA at 24 VDC, spring-loaded Ti24 terminal, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9A26898 specifications
ParameterValue
Main product or component typeOC and fault contact
Insulation voltage ui500 V conforming to IEC 60664-1
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degreePollution degree 2
ColorWhite
Depth73.5 mm
Width9 mm
Height85 mm
Electrical life cycles20000 cycles conforming to IEC 60947-5-4
ApplicationFor Smartlink interface
Operating temperature-25...70 °C

Product details

It is rated DC-12 at 2 to 100 mA at 24 VDC, so it is sized for low-level DC switching in control and indication circuits, not for power loads. The 9 mm width clips onto a DIN rail, making it a single-module addition to an Acti9 distribution panel.

The DC-12 rating at 2...100 mA, 24 VDC defines the switching capability for resistive DC loads — this contact is not intended for motor or inductive switching. The 1 NO + 1 NC composition gives one changeover function for status feedback and one for fault signalling. Pollution degree 2 and tropicalisation class 2 per IEC 60947-5-1 mean it handles normal factory atmospheres with non-condensing humidity up to 93% at 40 °C. The CE mark confirms compliance for the European market.

Clip-on mounting on DIN rail, 9 mm wide — one module pitch. The bottom connection uses a spring-loaded Ti24 terminal accepting 0.5 to 1.5 mm² flexible or rigid cable, with a wire stripping length of 10 mm. The top is compatible with comb busbars and distribution blocks. A mechanical indicator provides local signalling of contact position.

MPN
A9A26898