The Schneider Electric A9C52416 is a Reflex iC60N integrated control circuit breaker from the Acti9 range, combining overcurrent protection with remote switching capability in a single 4-pole unit rated at 16 A with a C trip curve. Breaking capacity is 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC, certified to EN/IEC 60947-2 — sufficient for most commercial and light industrial distribution panels where fault levels stay under those thresholds.
Control and signalling
Control circuit accepts 230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC, with both maintained and impulse control signal types — so it works with a standard pushbutton, a PLC digital output, or a remote switch without an interposing relay. Local signalling includes a green LED for device ON, a flashing LED for device ready, tripped, or overheat conditions, plus a red LED for fault — enough status feedback to troubleshoot without opening the panel door. The toggle ON/OFF button on the front allows manual override, and the padlockable OFF position secures isolation for maintenance lockout.
Depth is 77 mm, height 84 mm, IP20 finger-safe terminals — standard for enclosure mounting with a transparent door or cover.
The Reflex iC60N integrates a control relay and an MCB into one package, which simplifies panel wiring and reduces component count compared to separate contactor and breaker combinations — a genuine space and labour saving if the 16 A rating fits your load.