Skip to main content
Schneider Electric A9C52416

Schneider Electric A9C52416 Reflex iC60N MCB, 16 A, 4P, C Cu

MPN A9C52416
Obsolete

Schneider Electric Acti9 Reflex iC60N integrated control circuit breaker, A9C52416, 16 A rated, 4 poles, curve C, 20 kA breaking capacity at 240 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C52416 specifications
ParameterValue
Trip unit typeThermal-magnetic
Control signal typeMaintained Impulse
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width117 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationControl Distribution

Product details

The Schneider Electric A9C52416 is a Reflex iC60N integrated control circuit breaker from the Acti9 range, combining overcurrent protection with remote switching capability in a single 4-pole unit rated at 16 A with a C trip curve. Breaking capacity is 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC, certified to EN/IEC 60947-2 — sufficient for most commercial and light industrial distribution panels where fault levels stay under those thresholds.

Control and signalling

Control circuit accepts 230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC, with both maintained and impulse control signal types — so it works with a standard pushbutton, a PLC digital output, or a remote switch without an interposing relay. Local signalling includes a green LED for device ON, a flashing LED for device ready, tripped, or overheat conditions, plus a red LED for fault — enough status feedback to troubleshoot without opening the panel door. The toggle ON/OFF button on the front allows manual override, and the padlockable OFF position secures isolation for maintenance lockout.

Depth is 77 mm, height 84 mm, IP20 finger-safe terminals — standard for enclosure mounting with a transparent door or cover.

The Reflex iC60N integrates a control relay and an MCB into one package, which simplifies panel wiring and reduces component count compared to separate contactor and breaker combinations — a genuine space and labour saving if the 16 A rating fits your load.

MPN
A9C52416