Breaking capacity is 20 kA Icu at 220–240 V AC and 10 kA at 380–415 V AC per EN/IEC 60947-2, which certifies it for industrial panel fault levels up to that range without upstream cascading. Three poles protected (3P), so it switches and protects all three phases simultaneously. Control voltage options span 24 V AC, 48 V AC, 230 V AC, 24 V DC, and 48 V DC — the 24 V DC variant is common for PLC or safety relay outputs; the 230 V AC version suits direct line-voltage control. The control type accepts maintained, impulse, or toggle signals, which gives flexibility for different remote-switching schemes. IP20 finger-safe terminals; separate earth-leakage block can be added downstream. Padlockable in the OFF position for LOTO compliance.
Where this class is used and deployment context
This is an integrated control circuit breaker — a single device that replaces a separate contactor + MCB pair in control and distribution panels. It is used where you need both remote on/off switching and overcurrent protection for a load: lighting circuits, small motor starters, resistive heating banks, or general distribution sub-circuits. The Reflex iC60N series sits in the Acti9 range, which is Schneider's modular DIN-rail platform for commercial and industrial panel building. The 10 A rating with B curve makes it suited for loads with low inrush — think lighting contactor duty or control transformer primary protection. For motor starting (higher inrush), a C or D curve would be more appropriate; this B curve will trip faster on inductive starts.