Breaking capacity reaches 36 kA Icu at 12-60 VAC (per EN/IEC 60947-2), which covers most industrial control panel fault levels. At 220-240 VAC the rating drops to 10 kA Icu, still adequate for standard distribution boards. The part carries dual certification to EN/IEC 60947-2 (industrial) and EN/IEC 60898-1 (residential/commercial), giving you flexibility to spec it across plant and facility applications under one catalog number.
The 18 mm width per pole keeps panel density predictable. IP20 finger-safe front protects operators in open-panel environments. Rated insulation voltage is 500 VAC, overvoltage category IV, pollution degree 3 — suited for main distribution panels where transient overvoltages are a concern. Thermal-magnetic trip unit with a trip indicator provides local visual confirmation of a faulted circuit. Contact position indicator confirms the main contacts are open — useful during lockout/tagout verification. The part is suitability-for-isolation certified per both EN/IEC 60898-1 and EN/IEC 60947-2, meaning it can be used as a disconnecting means where local codes require it.