Skip to main content
Log in
Schneider Electric A9K24613 — 1-Pole MCB (DIN Rail)

Schneider Electric A9K24613 Acti9 iK60N MCB, 1P+N, 13 A, C-C

MPNA9K24613
Obsolete

Schneider Electric Acti9 iK60N, miniature circuit breaker, 1P+N, 13 A, C-curve, 6 kA Icn at 230 V AC, EN/IEC 60898-1, DIN rail clip-on.

Schneider Electric A9K24613 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9K24613 — Identification
ParameterValue
Product nameActi9 iK60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiK60N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9K24613 — Electrical & Protection
ParameterValue
Rated current (In)13 A at 30 °C
Tripping curve codeC
Magnetic tripping limit5...10 x In
Breaking capacity (Icu / AIR)6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Overvoltage categoryII
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9K24613 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminal (top or bottom) 1...25 mm² rigid Tunnel type terminal (top or bottom) 1...16 mm² flexible
Mounting supportDIN rail
Mounting modeClip-on
Width36 mm
Height85 mm
Depth78.5 mm
Tightening torque (by circuit)2 N.m top or bottom
A9K24613 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9K24613 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1
A9K24613 — Electrical
ParameterValue
[Ui] rated insulation voltage440 V AC 50/60 Hz conforming to EN/IEC 60898-1
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60898-1

Product details

The Schneider Electric A9K24613 is a 1P+N miniature circuit breaker from the Acti9 iK60N series, rated 13 A at 30 °C with a C-curve magnetic trip (5...10 x In). The 1P+N configuration switches the phase and breaks the neutral, but only the phase is protected (one protected pole). The neutral is switched but not monitored for overload — standard for single-phase final circuits where the neutral is not expected to carry imbalance current.

Clip-on mounting to DIN rail (35 mm per EN 60715). Depth is 78.5 mm, height 85 mm. Tunnel terminals accept 1...25 mm² rigid or 1...16 mm² flexible copper; tighten to 2 N.m. Strip 14 mm of insulation. Pollution degree 2 (non-conductive dust, occasional condensation) matches typical indoor panel conditions. Overvoltage category II applies, so it is intended for fixed-installation socket and lighting circuits, not for incoming mains or utility metering.

Frequently asked questions

What is the breaking capacity of the A9K24613?

6 kA Icn at 230 V AC, 50/60 Hz, conforming to EN/IEC 60898-1. That is the rated short-circuit capacity for this miniature circuit breaker.

Where can I buy the A9K24613 and what is the lead time?

Sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at the time of quote — no stock count or lead-time figure is published here.

What compliance documentation does Schneider Electric provide for the A9K24613?

The MCB is certified to EN/IEC 60898-1. The standard itself covers safety and performance requirements for miniature circuit breakers. Specific RoHS, REACH, or UL documentation should be requested at quote time from the supplier.

MPN
A9K24613