Skip to main content
Log in
Schneider Electric A9P52710 — Circuit Breaker Accessories

Schneider Electric A9P52710 Acti9 iC40 MCB, 10 A C-Curve 3P+

MPNA9P52710
Active

Schneider Electric Acti9 iC40, miniature circuit-breaker, 10 A, C curve, 3P+N, 4.5 kA Icn / 6 kA Icu at 400 V AC, clip-on DIN rail.

$99.52Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9P52710 — Identification
ParameterValue
Product / component typeMiniature circuit-breaker
Product nameActi9 iC40
Product rangeActi9
Device applicationDistribution
A9P52710 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]10 A
Rated operational voltage [Ue]400 V AC 50/60 Hz
Rated insulation voltage [Ui]440 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60947-2
Network frequency50/60 Hz
Poles description3P + N
Magnetic tripping limit5...10 x In conforming to EN/IEC 60898-1 8 x In +/- 20 % conforming to EN/IEC 60947-2
A9P52710 — Protection & Performance
ParameterValue
Breaking capacity4500 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 6 kA Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated service breaking capacity [Ics]4500 A 100 % x Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 4.5 kA 75 % x Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Mechanical durability20000 cycles
Electrical durability20000 cycles
Local signallingON/OFF indication Trip indicator
Contact position indicatorYes
A9P52710 — Mechanical
ParameterValue
Connections / terminalsTunnel type terminals top or bottom 1...10 mm² flexible Tunnel type terminals top or bottom 1...16 mm² rigid
Device short nameiC40
Control typeToggle
Mounting modeClip-on
Mounting supportDIN rail
Usable 9 mm pitches6
Width54 mm
Height85 mm
Depth74 mm
ColourWhite
A9P52710 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-40...85 °C
A9P52710 — Approvals
ParameterValue
StandardsEN/IEC 60898-1 EN/IEC 60947-2
A9P52710 — Specifications
ParameterValue
Curve codeC
Number of protected poles3

Product details

The Schneider Electric A9P52710 is an Acti9 iC40 miniature circuit-breaker rated 10 A with a C curve, configured 3P+N. The C curve (magnetic trip 5–10 × In per EN/IEC 60898-1, 8 × In ±20% per EN/IEC 60947-2) suits it for mixed resistive and moderate inductive loads — typical for general lighting and socket circuits in commercial or light industrial panels.

Breaking capacity and dual standard rating

This MCB carries two breaking-capacity ratings at 400 V AC: 4.5 kA Icn under EN/IEC 60898-1 (the domestic/light-commercial standard) and 6 kA Icu under EN/IEC 60947-2 (the industrial standard). The 4.5 kA Icn rating is the service breaking capacity for the 60898-1 duty cycle; the 6 kA Icu is the ultimate breaking capacity under 60947-2, and it also qualifies this breaker for isolation duty (marked 'suitable for isolation' per 60947-2).

The 3P+N unit occupies 6 x 9 mm pitches (54 mm total width).

Dual-certified to EN/IEC 60898-1 and EN/IEC 60947-2. Limitation class 3 per 60898-1, pollution degree 3 per 60947-2. IMQ quality label. The part carries an ON/OFF indication and a trip indicator on the toggle. Earth-leakage protection requires a separate block — not integrated.

Frequently asked questions

What is the breaking capacity of A9P52710?

The A9P52710 has a breaking capacity of 4.5 kA Icn at 400 V AC per EN/IEC 60898-1 and 6 kA Icu at 400 V AC per EN/IEC 60947-2.

Where can I buy A9P52710?

The A9P52710 is sourced to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time.

What is the closest alternative to A9P52710 in the Acti9 family?

Within the Acti9 iC40 range, the closest alternative would be a different current rating or curve code — the mechanical footprint and terminal specs are identical across the series. No pin-compatible alternative exists outside the iC40 family without changing the DIN-rail footprint.

MPN
A9P52710