The Schneider Electric C60H2P10AC is a 1P+N miniature circuit breaker from the Multi9 C60H range, rated 10 A at 30 °C with a C-curve (magnetic trip 5–10 × In). It occupies 4 modular pitches (36 mm wide) on a 35 mm symmetrical DIN rail, making it a direct drop-in for any Multi9 distribution board — no need to gut the existing layout to swap in a modern unit. Breaking capacity hits 10 kA Icu at 440 V AC (IEC 60947-2), 15 kA at 400–415 V, and 30 kA at 230–240 V — enough headroom for most commercial and light industrial sub-distribution panels. The 1P+N configuration (neutral left, one protected pole) suits single-phase final circuits where you want overcurrent protection on the phase and a switched neutral.
Rated operational voltage 440 V AC, insulation voltage 500 V AC — the part is isolation-suitable per IEC 60947-2, so you can use it as a disconnecting means with the contact position indicator showing ON/OFF state through the toggle. Mechanical durability rated at 20,000 cycles — fine for distribution duty where the breaker isn't switched daily. Tunnel-type terminals are straightforward for panel builders. Tropicalisation level 2 per IEC 60068-1 and 95% RH at 55 °C means it handles humid environments without derating — relevant for Southeast Asia or coastal installations.