The Schneider Electric GV2DP102F7 is a direct-on-line (DOL) combination motor starter from the TeSys Deca range, factory-assembled as a single unit containing a GV2P motor circuit breaker, a GV2AF3 combination block, and a 3-pole contactor with a 110 V AC coil. It provides thermal and magnetic motor protection over a 0.16…0.25 A adjustment range.
Rated for AC-3 utilization category, this starter is sized for a 0.06 kW motor on 400/415 V or 440 V supplies — suitable for small pumps, fans, or conveyors where DOL starting is acceptable. The magnetic tripping current is set at 2.4 A, which clears short-circuit faults before the contactor welds; the listed breaking capacity of 130 kA at 400/415 V (per IEC 60947-4-1) means the unit can safely interrupt faults up to that prospective level without upstream fuse damage, provided the supply network's fault current is within that limit. Type 2 coordination ensures the contactor remains operational after a fault — no contact welding under the rated short-circuit condition.
The unit occupies a 45 mm wide footprint on a DIN rail, with a depth of 105.6 mm and height of 176.4 mm. The pre-assembled composition eliminates separate breaker-contactor wiring, saving panel space and reducing assembly time on the line.