The Schneider Electric GV2DP107F7 is a direct-on-line (DOL) combination starter from the TeSys Deca range, integrating a 3-pole motor circuit breaker (type GV2P) and a 3-pole contactor into a single block, factory-assembled with a GV2AF3 combination block. It provides coordinated motor starting and overload protection in a compact, non-reversing package. The thermal protection adjustment range of 1.6 to 2.5 A sets the overload relay trip point, matching it to the motor's full-load current. For a 400/415 V supply, this corresponds to a motor power rating of 0.75 kW; at 440 V it also covers 0.75 kW, and at 500 V it reaches 1.1 kW. Rated in utilisation category AC-3 (squirrel-cage motor starting and switching off during running), the starter delivers a rated breaking capacity of 130 kA at 400/415 V, 440 V, and 500 V, conforming to IEC 60947-4-1. The magnetic tripping current is fixed at 33.5 A, providing short-circuit protection coordinated to Type 2 — meaning the contactor and overload relay remain serviceable after a fault at the rated breaking capacity.
The starter measures 45 mm wide, 176.4 mm high, and 105.6 mm deep. The 105.6 mm depth is the dimension from the DIN-rail mounting surface to the furthest projection — check this against the enclosure's internal depth, especially if a door-mounted operator or additional terminal blocks sit behind the panel.