The Schneider Electric HMIP6AFB0NA0DNAN00 is a Harmony P6 modular box PC with a 15.6-inch LED touch panel screen, built for machine-level HMI and SCADA visualization in industrial environments. It runs on a 12-24 VDC supply and carries IP66f/IP67f protection on the front face, meaning the display side withstands high-pressure washdown and temporary immersion — suited for food, beverage, or chemical processing lines where hose-down cleaning is routine. The NEMA 4X/13 rating adds corrosion resistance and oil/dust exclusion for the same panel face.
Display and interaction
The 15.6-inch LED display renders 16 million colours at a native resolution of 4096 x 2304 pixels (60 Hz), with a pixel resolution of 1024 x 768 for the touch interface. The 16:9 aspect ratio matches standard widescreen HMI layouts. Backlight lifespan is rated at 50,000 hours at 25 °C — roughly 5.7 years of continuous run time before the backlight dims to half brightness.
Power and environmental limits
Supply voltage range is 9-36 VDC, with a nominal 12-24 VDC rating. Inrush current hits 30 A on power-up — factor that into your DC supply sizing and fuse selection. The unit operates from 0 to 55 °C ambient (panel side) and stores from -20 to 60 °C. Non-condensing humidity range is 10-90 %. Operating altitude is limited to 2000 m. Pollution degree 2 (normally only non-conductive pollution) applies, so the unit is intended for clean, dry indoor panel environments despite the washdown-rated front face.
Environmental robustness and compliance
Shock resistance is rated at 147 m/s² in X, Y, Z directions (3 times each). Vibration resistance is 9.8 m/s² over 9-150 Hz (M.2 SSD, per IEC 61131-2). EMC immunity includes electrostatic discharge at 6 kV contact (IEC 61000-4-2 level 3), plus immunity to fast transients per IEC 61000-4-4. The unit complies with FCC Part 15 and UL 61010-2-201. Fanless cooling means no moving parts to fail — one less maintenance item on the BOM.
Software and connectivity
The HMIP6AFB0NA0DNAN00 ships with Node-RED preinstalled, plus run-time licenses for EcoStruxure Machine SCADA Expert, EcoStruxure Operator Terminal Expert, and AVEVA System Platform (on configured offers). EcoStruxure Secure Connect, Stratus EverRun, and Trellix are available with separately purchased licenses. One expansion slot accepts optional interface modules for fieldbus or additional I/O.
Mounting and physical integration
Mounts via panel cut-out (394 x 250 mm, +1/-0 mm tolerance) or VESA pattern. Overall dimensions: 408 mm wide, 264 mm high, 67 mm deep. The panel-side depth is shallow enough to fit most standard enclosures without protruding into cable duct space. Verify the cut-out tolerance against your panel punch — the +1/-0 mm spec means the hole must be cut to size or slightly larger, never smaller.