Skip to main content
Schneider Electric HMIP6AFB0NA0DNAN00

Schneider Electric HMIP6AFB0NA0DNAN00 Harmony P6 Panel PC, 1

MPN HMIP6AFB0NA0DNAN00
Active

Schneider Electric Harmony P6 modular box PC, touch panel screen, 15.6 inch LED display, 2-core processor, 12-24 VDC supply, IP66f/IP67f, NEMA 4X/13.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

HMIP6AFB0NA0DNAN00 specifications
ParameterValue
Display typeLED
IP ratingIP20 / IP66 / IP67
NEMA ratingNEMA 4X/13
Temp storage max60 °C
Temp storage min-20 °C
Temp operating max55 °C
Temp operating min0 °C
Storage temperature-4...140 °F (-20...60 °C)
Pollution degree2
Depth2.6 in (67 mm)
Width16.06 in (408 mm)
Height10.4 in (264 mm)
Resolution4096 x 2304 pixels at 60 Hz
Size15.6 inch
Operating temperature32...131 °F (0...55 °C) panel side 32...131 °F (0...55 °C) book mounting side 32...131 °F (0...55 °C) flat mounting top 32...131 °F (0...55 °C) panel top 32...122 °F (0...50 °C) panel with 19" W, 22" W display) side

Product details

The Schneider Electric HMIP6AFB0NA0DNAN00 is a Harmony P6 modular box PC with a 15.6-inch LED touch panel screen, built for machine-level HMI and SCADA visualization in industrial environments. It runs on a 12-24 VDC supply and carries IP66f/IP67f protection on the front face, meaning the display side withstands high-pressure washdown and temporary immersion — suited for food, beverage, or chemical processing lines where hose-down cleaning is routine. The NEMA 4X/13 rating adds corrosion resistance and oil/dust exclusion for the same panel face.

Display and interaction

The 15.6-inch LED display renders 16 million colours at a native resolution of 4096 x 2304 pixels (60 Hz), with a pixel resolution of 1024 x 768 for the touch interface. The 16:9 aspect ratio matches standard widescreen HMI layouts. Backlight lifespan is rated at 50,000 hours at 25 °C — roughly 5.7 years of continuous run time before the backlight dims to half brightness.

Power and environmental limits

Supply voltage range is 9-36 VDC, with a nominal 12-24 VDC rating. Inrush current hits 30 A on power-up — factor that into your DC supply sizing and fuse selection. The unit operates from 0 to 55 °C ambient (panel side) and stores from -20 to 60 °C. Non-condensing humidity range is 10-90 %. Operating altitude is limited to 2000 m. Pollution degree 2 (normally only non-conductive pollution) applies, so the unit is intended for clean, dry indoor panel environments despite the washdown-rated front face.

Environmental robustness and compliance

Shock resistance is rated at 147 m/s² in X, Y, Z directions (3 times each). Vibration resistance is 9.8 m/s² over 9-150 Hz (M.2 SSD, per IEC 61131-2). EMC immunity includes electrostatic discharge at 6 kV contact (IEC 61000-4-2 level 3), plus immunity to fast transients per IEC 61000-4-4. The unit complies with FCC Part 15 and UL 61010-2-201. Fanless cooling means no moving parts to fail — one less maintenance item on the BOM.

Software and connectivity

The HMIP6AFB0NA0DNAN00 ships with Node-RED preinstalled, plus run-time licenses for EcoStruxure Machine SCADA Expert, EcoStruxure Operator Terminal Expert, and AVEVA System Platform (on configured offers). EcoStruxure Secure Connect, Stratus EverRun, and Trellix are available with separately purchased licenses. One expansion slot accepts optional interface modules for fieldbus or additional I/O.

Mounting and physical integration

Mounts via panel cut-out (394 x 250 mm, +1/-0 mm tolerance) or VESA pattern. Overall dimensions: 408 mm wide, 264 mm high, 67 mm deep. The panel-side depth is shallow enough to fit most standard enclosures without protruding into cable duct space. Verify the cut-out tolerance against your panel punch — the +1/-0 mm spec means the hole must be cut to size or slightly larger, never smaller.

MPN
HMIP6AFB0NA0DNAN00