TeSys F 4-Pole Contactor, 250 A AC-1 — EOL Sourcing Note
The Schneider Electric LC1F1504V7 is a TeSys F contactor with four normally-open power poles, rated 250 A in AC-1 utilisation category at ≤440 V and ≤40 °C — meaning it is sized for resistive loads such as heaters or large lighting banks, not motor starting. The 400 V AC control coil draws 770 VA inrush, holding at 8.1 VA.
Dimensions, Mounting, and Wiring
The LC1F1504V7 measures 171 mm deep by 200.5 mm wide by 170 mm high and mounts to a plate (not DIN rail). Power circuit connections accept bar (25 x 3 mm busbar), ring-terminal lugs up to 120 mm², or bolted connection; torque to 18 N·m. Control circuit uses screw-clamp terminals accepting 1 to 4 mm² flexible or solid, torqued to 1.2 N·m. IP2X front-face protection with shrouds per IEC 60529.
Designed and tested to IEC 60947-4-1, EN 60947-4-1, and JIS C8201-4-1. Rated insulation voltage 1000 V per IEC 60947-4-1, impulse withstand voltage 8 kV, overvoltage category III. Protective treatment TH for tropical environments. Operating altitude 3000 m without derating. Associated fuse rating 160 A aM or 250 A gG at ≤440 V.