Skip to main content
Log in
Schneider Electric LE1D803A60OG70 — Motor Starters

Schneider Electric LE1D803A60OG70 TeSys LE1 Starter, 125 A,

MPNLE1D803A60OG70
Active

Schneider Electric TeSys LE1 series, full voltage non-reversing starter, LE1D803A60OG70, 125 A, 60 HP at 575 VAC, 120 VAC 50/60 Hz coil, NEMA 1 steel enclosure.

Schneider Electric LE1D803A60OG70 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LE1D803A60OG70 — Specifications
ParameterValue
Starter typeNon reversing
Current rating125 A
Enclosure typeNEMA 1 steel
Protection typeSwitch-disconnector fuse
Range of productInstakits
Horsepower rating7.5 hp 120 V AC, 1 phase 15 hp 240 V AC, 1 phase 25 hp 208 V AC, 3 phases 30 hp 230 V AC, 3 phases 60 hp 460 V AC, 3 phases 60 hp 575 V AC, 3 phases
Auxiliary contacts1 NO + 1 NC
Location of connectionLine
Maximum voltage rating600 V AC
Control circuit voltage120 V AC 50/60 Hz
Product or component typeFull voltage starter

Product details

It's rated 125 A continuous and carries switch-disconnector fuse protection, meaning the disconnect and fuse block are integrated into the same package — one SKU for the panel builder, not a separate fusible switch plus contactor assembly.

Horsepower coverage — what motor it drives

The horsepower table spans single-phase and three-phase motors: 7.5 hp at 120 VAC single-phase, 15 hp at 240 VAC single-phase, 25 hp at 208 VAC three-phase, 30 hp at 230 VAC three-phase, and 60 hp at both 460 VAC and 575 VAC three-phase. That 60 hp at 575 VAC is the ceiling — common for 600 V class industrial lines in North America.

Control voltage and auxiliary contacts

Coil is 120 VAC 50/60 Hz, which is the standard control voltage for most North American panels. The starter ships with one normally-open and one normally-closed auxiliary contact built in — enough to seal in the starter and send a status signal back to the PLC without adding an aux block.

Frequently asked questions

What is the current rating of LE1D803A60OG70?

The continuous current rating is 125 A. That's the thermal rating for the main power path through the switch-disconnector and contactor.

What motor horsepower can LE1D803A60OG70 handle?

It covers 7.5 hp at 120 VAC single-phase, 15 hp at 240 VAC single-phase, 25 hp at 208 VAC three-phase, 30 hp at 230 VAC three-phase, and 60 hp at both 460 VAC and 575 VAC three-phase.

What control voltage does the LE1D803A60OG70 coil use?

The coil is 120 VAC 50/60 Hz. Standard North American panel voltage.

Where can I buy LE1D803A60OG70?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
LE1D803A60OG70