Skip to main content
Schneider Electric LE1D803A60OG70

Schneider Electric LE1D803A60OG70 TeSys LE1 Starter, 125 A,

MPN LE1D803A60OG70
Active

Schneider Electric TeSys LE1 series, full voltage non-reversing starter, LE1D803A60OG70, 125 A, 60 HP at 575 VAC, 120 VAC 50/60 Hz coil, NEMA 1 steel enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LE1D803A60OG70 specifications
ParameterValue
Starter typeNon reversing
Enclosure typeNEMA 1 steel
Protection typeSwitch-disconnector fuse
Main product or component typeFull voltage starter
Coil voltage120 V AC 50/60 Hz
Current125 A
Aux contact count1 NO + 1 NC

Product details

It's rated 125 A continuous and carries switch-disconnector fuse protection, meaning the disconnect and fuse block are integrated into the same package — one SKU for the panel builder, not a separate fusible switch plus contactor assembly.

Horsepower coverage — what motor it drives

The horsepower table spans single-phase and three-phase motors: 7.5 hp at 120 VAC single-phase, 15 hp at 240 VAC single-phase, 25 hp at 208 VAC three-phase, 30 hp at 230 VAC three-phase, and 60 hp at both 460 VAC and 575 VAC three-phase. That 60 hp at 575 VAC is the ceiling — common for 600 V class industrial lines in North America.

Control voltage and auxiliary contacts

Coil is 120 VAC 50/60 Hz, which is the standard control voltage for most North American panels. The starter ships with one normally-open and one normally-closed auxiliary contact built in — enough to seal in the starter and send a status signal back to the PLC without adding an aux block.

MPN
LE1D803A60OG70