Skip to main content
Log in
Schneider Electric MH30702P16A2200 — Servo Motors with Brake

Schneider Electric MH30702P16A2200 Servo Motor, 1380 W

MPNMH30702P16A2200
Obsolete

Schneider Electric MH30702P16A2200 servo motor, MH3 series, 1380 W continuous power, three-phase, IP65, single-turn SinCos Hiperface encoder, without holding brake.

Schneider Electric MH30702P16A2200 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MH30702P16A2200 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
MH30702P16A2200 — Performance
ParameterValue
Nominal torque20.98 lbf.in (2.37 N.m) LXM52 2.82 mA, 115 V, three phase 19.74 lbf.in (2.23 N.m) LXM52 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM52 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM52 2.36 mA, 480 V, three phase 20.98 lbf.in (2.37 N.m) LXM62 2.82 mA, 115 V, single phase 19.74 lbf.in (2.23 N.m) LXM62 2.7 mA, 230 V, single phase 17.79 lbf.in (2.01 N.m) LXM62 2.49 mA, 400 V, three phase 16.73 lbf.in (1.89 N.m) LXM62 2.36 mA, 480 V, three phase
Nominal output power0.31 W, 115 V 0.7 W, 230 V 1.16 W, 400 V 1.38 W, 480 V
Continuous power1380 W
Nominal speed1250 rpm LXM52 2.82 mA, 115 V, single phase 3000 rpm LXM52 2.7 mA, 230 V, single phase 5500 rpm LXM52 2.49 mA, 400 V, three phase 7000 rpm LXM52 2.36 mA, 480 V, three phase 1250 rpm LXM62 2.82 mA, 115 V, single phase 3000 rpm LXM62 2.7 mA, 230 V, single phase 5500 rpm LXM62 2.49 mA, 400 V, three phase 7000 rpm LXM62 2.36 mA, 480 V, three phase
Maximum mechanical speed8000 rpm
Continuous stall torque21.95 lbf.in (2.48 N.m), 115...480 V, three phase
Peak stall torque65.5 lbf.in (7.4 N.m), 115...480 V, three phase
Rotor inertia1.13 kg.cm²
MH30702P16A2200 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
PhaseThree phase
Maximum current (Irms)9.68 A
Continuous stall current2.94 A
Torque constant0.84 N.m/A 248 °F (120 °C)
Back-EMF constant54.08 V/krpm
Number of motor poles10
Stator resistance3.84 Ohm
Stator inductance12.19 mH
Stator electrical time constant3.2 ms
Electrical connectionRotatable right-angled connectors
MH30702P16A2200 — Feedback
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Speed feedback resolution16 periods
MH30702P16A2200 — Mechanical
ParameterValue
Shaft end styleParallel key
Shaft diameter0.4 in (11 mm)
Shaft length0.9 in (23 mm)
Second shaft endWithout second shaft end
Key width0.2 in (4 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length6.06 in (154 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
MH30702P16A2200 — Environmental
ParameterValue
IP degree of protectionIP65 standard
Cooling methodNatural convection
Winding (copper hot) temperature275 °F (135 °C)

Product details

Motor sizing and drive pairing

The MH30702P16A2200 is a 1380 W continuous-power servo motor from Schneider Electric's MH3 series, designed for three-phase supply. The continuous stall torque is 2.48 N.m across the 115...480 V range, with a peak stall torque of 7.4 N.m — the ratio tells you the short-term overload margin for acceleration and deceleration phases. Nominal torque depends on the drive voltage and type: 2.37 N.m at 115 V three-phase, 2.23 N.m at 230 V single-phase, 2.01 N.m at 400 V three-phase, and 1.89 N.m at 480 V three-phase. The nominal speed follows the same pattern — 1250 rpm at 115 V up to 7000 rpm at 480 V — so the drive voltage selection directly sets the speed-torque envelope.

Environmental sealing and cable routing

IP65 standard means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown areas in food processing or dusty packaging lines. The rotatable right-angled connectors let you orient the cable exit in tight cabinets without adding a separate junction box. Maximum radial force at the shaft is derated with speed: 710 N at 1000 rpm down to 390 N at 6000 rpm. This is the bearing load limit — an overhung pulley or belt drive must stay below the curve at the operating speed.

Frequently asked questions

What is the MH30702P16A2200's phase requirement?

The motor is a three-phase design. The drive must supply three-phase output at the voltage that matches the required speed-torque point from the nominal curves.

Does the MH30702P16A2200 include a holding brake?

No. This variant is supplied without a holding brake. For vertical-axis applications or any load that must hold position at power-off, an external brake or a braked motor variant is needed.

MPN
MH30702P16A2200