Skip to main content
Schneider Electric A9L2F900

Schneider Electric A9L2F900 iPRD F40r Cartridge, Type 2+3, 4

MPN A9L2F900
Active

Schneider Electric Acti9 iPRD F40r, Type 2+3 surge protection cartridge, 40 kA max discharge, < 25 ns response, 18 mm wide, plug-in mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L2F900 specifications
ParameterValue
Main product or component typeCartridge
Voltage240 V AC 50/60 Hz
IP ratingIP20
Response time< 25 ns
Temp storage max85 °C
Temp storage min-40 °C
Storage temperature-40...85 °C
ColorWhite (RAL 9003)
Depth57.2 mm
Width18 mm
Height45 mm
MaterialThermoplastic

Product details

The Schneider Electric A9L2F900 is an iPRD F40r surge protection cartridge from the Acti9 range, rated as Type 2+3 per IEC 61643-11. It handles a maximum discharge current of 40 kA in differential mode (L/N) and responds in under 25 ns, clamping the voltage protection level to below 1.5 kV. The integrated fuse means no separate external overcurrent protection is needed for the SPD circuit — one less part to spec and panel-wire.

Type 2+3 classification means this cartridge handles both main distribution board surges (Type 2, 8/20 µs wave) and equipment-level protection (Type 3, combined wave). The 40 kA max discharge (Imax) tells you it can absorb a single high-energy strike without failing; the 20 kA nominal discharge (In) is the rating for repeated events over the product's life. The < 25 ns response time is typical for MOV-based suppressors; it clips fast enough to protect sensitive electronics like PLC power supplies or VFD control boards. The temporary overvoltage (TOV) ratings — 337 V for 5 s withstand, 442 V for 120 min safe failure mode — tell you the cartridge survives a sustained overvoltage event (e.g., a lost neutral) without catching fire, transitioning to a fail-safe short rather than catastrophic rupture.

This cartridge plugs into the iPRD F40r 3P or 3P+N base module (sold separately). The 18 mm width matches a single DIN-rail pitch; two pitches (9 mm each) are occupied. It's designed for TT, TN-S, and TN-C earthing systems, covering most commercial and industrial distribution panels in Europe and markets following IEC wiring rules.

MPN
A9L2F900