Skip to main content
Schneider Electric ABE7S16S1B2E

Schneider ABE7S16S1B2E Solid State Output Relay Sub-base, 16

MPN ABE7S16S1B2E
Active

Schneider Modicon ABE7 solid state output relay sub-base, ABE7S16S1B2E, 16 channels, 0.5 A per channel, 24 V DC, 125 mm wide, spring terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ABE7S16S1B2E specifications
ParameterValue
Fault typeShort-circuit Overload
Terminal block typeRemovable
Frequency< 0.6/LI² Hz
IP ratingIP2X
Response time<= 0.2 ms from state 0 to 1
Temp storage max80 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...80 °C conforming to IEC 61131-2
Pollution degreePollution degree 2
Width125 mm
Channels16
Operating temperature-5...60 °C conforming to IEC 61131-2

Product details

The Schneider Modicon ABE7S16S1B2E is a solid state output relay sub-base with 16 channels, each rated at 0.5 A at the preactuator end. The sub-base provides short-circuit and overload fault protection via an internal 2 A fast-blow fuse at the PLC end, plus an adjustable external fuse at the preactuator end. Response time is ≤ 0.2 ms from state 0 to 1, making it suitable for fast-switching applications in control panels.

The 0.5 A per channel rating at the preactuator end governs the load each output can drive — stay within this for inductive or resistive loads. Maximum switching current is 700 mA for DC-12 and DC-13 loads, with a minimum switching current of 1 mA, so it handles both small signal relays and moderate solenoid valves. The maximum current per output common is 9 A, which means you can group up to 18 channels at 0.5 A each on a single common, but watch the thermal derating above 40 °C.

This sub-base is a DIN-rail-mounted component (35 mm symmetrical rail) with a width of 125 mm, so plan for that slot in your panel layout. Spring terminals accept 0.14...2.5 mm² solid or flexible wire, making field wiring straightforward. The removable terminal block simplifies replacement without disturbing wiring. IP2X protection means it's suitable for enclosed cabinets, not open washdown areas.

MPN
ABE7S16S1B2E