Skip to main content
Schneider Electric ATV1200A125001010

Schneider ATV1200A125001010 AC Drive, 10.45 MW, 2970-3630 V

MPN ATV1200A125001010
Active

Schneider Electric Altivar 1200 series, ATV1200A125001010 medium-voltage AC drive, 10.45 MW, 2970-3630 V input, 48-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A125001010 specifications
ParameterValue
Input type48 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current720 A
IP ratingIP42 / IP31 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (standard efficiency)
Width15080 mm (standard efficiency)
Height3040 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

The ATV1200A125001010 is a medium-voltage variable frequency drive rated for 10.45 kW motor power, supplied from a 2970–3630 V AC line via a 48-pulse diode rectifier bridge. That input configuration draws 720 A line current and presents an apparent power of 12.5 MVA — numbers that define the upstream transformer and switchgear rating, not just the drive itself. The 48-pulse topology reduces line-side harmonics to levels that typically meet IEEE 519 without additional filtering, which saves cabinet space and avoids tuning hassles on weak grids. Prospective short-circuit current withstand is 31.5 kA for 150 ms — the drive can ride through a bolted fault on its input bus long enough for the upstream breaker to clear, without self-destructing.

Floor-standing enclosure — dimensions and site prep

The drive ships in a floor-standing enclosure with separate airflows for power and control sections. Dimensions are 3040 mm high, 15080 mm wide, 1600 mm deep — this is a room-sized assembly, not a cabinet you slide into a row. The width alone dictates a dedicated drive room or a reinforced slab. Cooling is forced convection moving 140,000 m³/h of air — plan for intake and exhaust louvres sized to that flow, plus acoustic treatment given the 80 dB noise level. Electrical connection uses M10 screw-type bars accepting up to 6 x 40 mm² per phase, entry from top or bottom. The cable gland plate must accommodate that cross-section.

Lifecycle and compliance — active production, CE marked

CE marking is in place, with compliance to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). The integrated EMC filter covers conducted emissions for the drive's rating class. Pollution degree 2 per EN/IEC 61800-5-1 and overvoltage category II — suitable for controlled indoor environments with non-conductive pollution.

MPN
ATV1200A125001010