Skip to main content
Schneider Electric ATV1200A21005555

Schneider ATV1200A21005555 AC Drive, 1756 kW, 2100 kVA

MPN ATV1200A21005555
Active

Schneider Electric Altivar 1200 ATV1200A21005555 medium-voltage AC drive, 1756 kW motor power, 2100 kVA, 2970–3630 V supply, 30-pulse input, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A21005555 specifications
ParameterValue
Input type30 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current220 A
IP ratingIP31 / IP41 / IP42
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (high efficiency) 1600 mm (standard efficiency)
Width4660 mm (standard efficiency) 4960 mm (high efficiency)
Height2670 mm high efficiency 2670 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

What this drive is and what it powers

The ATV1200A21005555 is a Schneider Electric Altivar 1200 medium-voltage AC drive rated for 1756 kW motor power at 2100 kVA apparent power, supplied from a 2970–3630 V three-phase line. It drives both asynchronous and synchronous motors, making it suitable for large pumps, compressors, conveyors, and fans in heavy industrial processes.

Input topology and fault handling

The 30-pulse diode rectifier bridge input reduces line harmonics below IEEE 519 thresholds without an external filter — the integrated EMC filter is already on board. Prospective line short-circuit current withstand is 31.5 kA for 150 ms, and dielectric strength between earth and power terminals is 20 kV AC — the drive can ride through a bolted fault on the input bus without self-destructing. Ground fault protection is built into the drive output stage, so a phase-to-ground fault on the motor cable trips the drive without relying on upstream protection.

Overload capability and cooling

Standard overload rating: 1.2 In for 60 s and 1.5 In for 3 s. High overload rating: 1.5 In for 60 s and 1.85 In for 3 s — the high-overload profile covers heavy starting duty cycles like crushers or extruders. Forced convection cooling moves 23,100 m³/h of air through the enclosure; the noise level at full fan speed is 80 dB, so ear protection is mandatory near the drive.

Physical footprint and enclosure

The drive ships in a floor-standing enclosure with separate air flows for the transformer and power cells. Standard-efficiency variant: 4660 mm wide × 1600 mm deep × 2670 mm high. High-efficiency variant: 4960 mm wide × 1700 mm deep × 2670 mm high. The enclosure is grey (RAL 7032) and must be installed vertically within ±10° of plumb.

Control wiring and I/O

Four software-configurable analogue inputs (0–20 mA / 4–20 mA, 24 V max, 250 Ω impedance) and two analogue outputs (same range). Six discrete inputs standard, expandable to ten. Control power requires an external 220 V AC supply at 3 kVA; the cooling fan runs on 380 V AC. Electrical isolation between power and control circuits is maintained per EN/IEC 61800-5-1.

CE marked. Designed to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). Pollution degree 2, overvoltage category II.

MPN
ATV1200A21005555