Skip to main content
Schneider Electric ATV1200A4703333

Schneider Electric ATV1200A4703333 Altivar 1200 MV Drive

MPN ATV1200A4703333
Active

Schneider Electric Altivar 1200 ATV1200A4703333 medium-voltage variable speed drive, 470 kVA, 393 kW motor power, 18-pulse diode rectifier, 2970-3630 V input, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A4703333 specifications
ParameterValue
Input type18 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current100 A
IP ratingIP41 / IP31 / IP42
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1400 mm (standard efficiency) 1500 mm (high efficiency)
Width2460 mm (standard efficiency) 2760 mm (high efficiency)
Height2520 mm standard efficiency 2670 mm high efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

What this MV drive delivers at the motor shaft

The ATV1200A4703333 is an Altivar 1200 medium-voltage drive rated for 470 kVA apparent power and 393 kW motor output — enough to handle a large pump, compressor, or conveyor in the 3 kV class. Input voltage range is 2970 to 3630 V, line current 100 A, fed through an 18-pulse diode rectifier bridge that reduces line-side harmonics below IEEE 519 thresholds without an external filter. An integrated EMC filter is standard, and the drive meets EN/IEC 61800-3 for conducted emissions in the intended industrial environment.

Footprint, cooling, and panel planning

This is a floor-standing enclosure, not a panel-mount module — standard-efficiency dimensions are 2460 mm wide × 2520 mm high × 1400 mm deep; high-efficiency variant stretches to 2760 × 2670 × 1500 mm. Cooling is forced convection with separate air flows for power and control sections; the standard-efficiency unit moves 9900 m³/h, the high-efficiency version 13200 m³/h — plan for ducting or room HVAC capacity. Ambient temperature range and humidity (0-90 % RH, 0-95 % optional) are per the spec table.

Overload profile and input topology

Standard overload: 1.2 × In for 60 s, 1.5 × In for 3 s. High overload: 1.5 × In for 60 s, 1.85 × In for 3 s. The prospective short-circuit current rating is 31.5 kA for 150 ms. The 18-pulse input means no external harmonic filter is required for most applications — the phase-shifting transformer inside the enclosure cancels the 5th and 7th harmonics at the primary side. Dielectric strength is 10 kV AC between earth and power terminals; isolation is electrical between power and control circuits, with pollution degree 2 per EN/IEC 61800-5-1.

I/O complement and motor compatibility

Four software-configurable analogue inputs (0-20 mA / 4-20 mA, 24 V max, 250 Ω impedance) and one analogue output of the same type. Six discrete inputs standard, expandable to ten. The drive handles both synchronous and asynchronous motors — the product composition includes a phase-shifting transformer, nine power cells, MV arrestors, cooling fans, and an HMI. Speed range is 20 to 100 % of rated speed. Output voltage equals the supply voltage (no step-up/step-down inside the drive).

Overvoltage category II per EN/IEC 61800-5-1. The enclosure is grey (RAL 7032). Vibration resistance is 4.9 m/s² at 10-50 Hz.

MPN
ATV1200A4703333