Skip to main content
Schneider Electric ATV1200A75506666

Schneider Electric ATV1200A75506666 AC Drive, 6312 kW

MPN ATV1200A75506666
Active

Schneider Electric Altivar 1200 ATV1200A75506666 AC Drive (VFD) 480V, 6312 kW motor power, 7550 kVA apparent power, 36-pulse diode rectifier input, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A75506666 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current720 A
IP ratingIP31 / IP42 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (standard efficiency)
Width9470 mm (standard efficiency)
Height3040 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

36-pulse VFD for 6 kV-class motors

The ATV1200A75506666 is a Schneider Electric Altivar 1200 medium-voltage AC drive rated for 6312 kW motor power at 7550 kVA apparent power, supplied from a 2970...3630 V line via a 36-pulse diode rectifier bridge. This is a floor-standing drive in a grey RAL 7032 enclosure with separate air flows for power and control sections, designed for asynchronous motor control in high-power applications like pumps, fans, and compressors.

Overload profile and protection

The drive handles 1.2× In for 60 s and 1.5× In for 3 s under standard overload; for high-overload duty it sustains 1.5× In for 60 s and 1.85× In for 3 s — the higher short-term ceiling matters for starting high-inertia loads like large fans or centrifuges. Ground-fault protection is built into the drive, and the 20 kV AC dielectric strength between earth and power terminals gives headroom for the 3.3 kV-class supply.

Environmental and installation constraints

The drive occupies a 3040 mm height × 9470 mm width × 1600 mm depth footprint (standard efficiency) and requires 90000 m³/h of cooling air via forced convection. Operating altitude up to 1000 m is full-rated; above that, derate 0.6 % per 100 m up to 2000 m. The unit must be installed vertically ±10° and the ambient relative humidity kept between 0...90 %.

CE marked, with compliance to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II. The drive includes an integrated EMC filter and electrical isolation between power and control sections.

Control interface and I/O

Four software-configurable analogue inputs (0...20 mA / 4...20 mA, 24 V max, 250 Ω impedance) and one analogue output of the same type. Six discrete inputs standard, expandable to ten. Control supply is 220 V AC, 3 kVA external; the cooling fan runs on 380 V AC internal supply. An optional external 220 V AC/DC control supply and external 380 V AC fan supply are available.

MPN
ATV1200A75506666