Skip to main content
Schneider Electric ATV212WD30N4

Schneider Electric ATV212WD30N4 AC Drive (VFD) 480V, 30 kW

MPN ATV212WD30N4
Active

Schneider Electric Altivar 212 ATV212WD30N4 AC drive, 30 kW, 3-phase 480 V, integrated Class C2 EMC filter, IP20, 720 x 284 x 315 mm.

$3,840.00 – $6,570.72 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212WD30N4 specifications
ParameterValue
Connector type1 RJ45 1 open style
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current44.7 A 480 V 56.7 A 380 V
Frequency50...60 Hz - 5...5 %
Phases3-phase
IP ratingIP55
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C
Storage temperature-13...158 °F (-25...70 °C)
Pollution degree3 IEC 61800-5-1
Depth12.4 in (315 mm)
Width11.2 in (284 mm)
Height28.3 in (720 mm)
Operating positionVertical +/- 10 degree

Product details

Drive rating and motor match

The ATV212WD30N4 is a 30 kW Altivar 212 drive, drawing 44.7 A line current at 480 V and 56.7 A at 380 V — the 480 V figure governs the upstream breaker and cable sizing for a 480 V installation. It is designed for asynchronous motors and includes an integrated Class C2 EMC filter, which meets the conducted emission limits for industrial environments under IEC 61800-3 category C2 without an external filter.

Panel fit and mounting constraints

The drive measures 28.3 in (720 mm) high by 11.2 in (284 mm) wide by 12.4 in (315 mm) deep — the height is the dimension that typically drives enclosure depth clearance when mounted vertically within ±10°. For corner-grounded distribution networks, the altitude is further limited to 2000 m.

Protection and communication

The drive includes a full suite of built-in protections: overcurrent, short-circuit between motor phases, input phase loss, DC bus overvoltage/undervoltage, motor thermal protection, and PTC probe input for direct motor winding temperature monitoring. Serial communication is via 2-wire RS-485 with Modbus RTU protocol at 9600 or 19200 bps, supporting up to 247 addresses on the bus. The two analog inputs are switch-configurable for voltage (0-10 V DC) or current (0-20 mA), with one input also configurable for PTC probes.

MPN
ATV212WD30N4