Skip to main content
Schneider Electric ATV212WU22N4CZH28

Schneider ATV212WU22N4CZH28 Altivar 212 VFD, 2.2 kW, C1 EMC

MPN ATV212WU22N4CZH28
Obsolete

Schneider Electric Altivar 212 series, ATV212WU22N4CZH28, variable speed drive for asynchronous motors, 2.2 kW / 3 hp, 380…480 V three-phase, integrated Class C1 EMC filter, CE marked.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212WU22N4CZH28 specifications
ParameterValue
Connector type1 open style 1 RJ45
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current4.6 A at 380 V 3.7 A at 480 V
Horsepower3 hp
Frequency50...60 Hz - 5...5 %
IP ratingIP54
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max50 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Depth192 mm
Width215 mm
Height297 mm
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree

Product details

The ATV212WU22N4CZH28 is a Schneider Altivar 212 variable speed drive rated for 2.2 kW / 3 hp asynchronous motor loads on a 380…480 V three-phase supply. Line current draws 4.6 A at 380 V and 3.7 A at 480 V, with apparent power of 3.9 kVA at 380 V. The integrated Class C1 EMC filter covers EN 61800-3 environments 1 and 2 categories C1 through C3, so it meets residential and industrial emission limits without an external filter — saves a DIN-rail slot and a wiring step. Switching frequency is adjustable from 6 to 16 kHz; above 12 kHz you derate the output current. Speed range runs 1 to 10 with ±10 % slip compensation from 0.2 Tn to Tn. Torque accuracy sits at ±15 %. The drive includes an adjustable PI regulator for closed-loop process control — pump, fan, conveyor applications where you want a setpoint, not just open-loop speed.

Dimensions are 215 mm wide, 297 mm tall, 192 mm deep — that depth (192 mm) is the key number for enclosure depth clearance; a standard 300 mm deep panel leaves you about 100 mm behind the door for wiring and finger clearance. Assembly style is with a heat sink, so it needs free air circulation around the fins. Operating position is vertical ±10°, pollution degree 3 per IEC 61800-5-1. Relative humidity range 5…95 % non-condensing. Altitude derating starts above 1000 m; corner-grounded distribution networks are limited to 2000 m.

Communications and I/O

Physical interface is 2-wire RS-485 with Modbus RTU frame at 9600 or 19200 bps, 8 bits, 1 stop, parity configurable. Supports up to 247 addresses on the bus. An optional LonWorks communication card is available. Analog inputs are switch-configurable for voltage (0…10 V DC, 30 kΩ impedance) or current (0…20 mA, 250 Ω), 10-bit resolution. One input also accepts PTC probes for motor thermal protection.

MPN
ATV212WU22N4CZH28