Skip to main content
Schneider Electric GC1610J5

Schneider GC1610J5 TeSys GC Modular Contactor, 12 VAC 1P

MPN GC1610J5
Obsolete

Schneider Electric TeSys GC series, GC1610J5 modular contactor, 1-pole, 12 V AC 50 Hz coil, clip-on DIN rail mount, 17.5 mm width.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC1610J5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage12 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current16 A AC-7 A 5 A AC-7B
Breaking capacity40 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7B AC-7 A
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC1610J5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationHeating Motor control Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The Schneider Electric GC1610J5 is a TeSys GC modular contactor — a 1-pole, 12 V AC 50 Hz coil device rated for switching motor, lighting, and heating loads under utilisation categories AC-7A and AC-7B per IEC 61095 and IEC 60947-5.

The 12 V AC 50 Hz control circuit is a fixed-voltage coil — not a wide-range electronic coil — so the supply must match within the operating limits: pick-up at 0.85 to 1.1 Uc, drop-out between 0.2 and 0.75 Uc at 50 Hz. Rated breaking and making capacity is 40 A at 400 V AC for the power circuit, which means it can interrupt motor inrush and lighting switching transients within the AC-7 duty envelope. Electrical durability is rated at 100,000 cycles for both AC-7A and AC-7B categories, with mechanical durability at 1,000,000 cycles — the contactor is designed for moderate switching frequency (300 cycles/hour max at 50 °C). Heat dissipation is 1.3 W at 50/60 Hz (0.65 W per pole), which matters for thermal budgeting inside a sealed or tightly packed DIN-rail enclosure.

Clip-on mounting on a standard DIN rail, occupying a single 18 mm module width. The white housing with IP20 finger protection (per VDE 0106) is suitable for enclosed panel installations where the contactor is not directly exposed to washdown or dust. Screw-clamp terminals accept up to 6 mm² flexible or solid on the power circuit, and up to 2.5 mm² on the control circuit. Tightening torque is 0.8 N·m for both — consistent with standard terminal-block tooling on the line.

MPN
GC1610J5