Skip to main content
Schneider Electric ILM0701P21F0000

Schneider Electric ILM0701P21F0000 PacDrive 3 servo motor

MPN ILM0701P21F0000
Active

Schneider Electric, PacDrive 3, ILM series, servo motor integrated drive, order code ILM0701P21F0000, 70 mm flange, 310 W nominal, IP65, Hiperface SinCos single-turn feedback, with holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0701P21F0000 specifications
ParameterValue
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP65
Length8.6 in (219 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

What this motor is, in one paragraph

The ILM0701P21F0000 is a Schneider Electric PacDrive 3 ILM servo motor with an integrated drive stage, listed as a 70 mm flange unit with a single motor stack and a 6-pole rotor built around an absolute single-turn SinCos Hiperface feedback device. It ships with a holding brake and a plain untapped shaft with no second shaft end, so the only mechanical interface to design around is the brake-equipped output side.

Torque, speed, and the load it can actually move

Continuous torque is rated at 0.5 N.m nominal with a continuous stall torque of 1.1 N.m, while the peak stall ceiling sits at 3.5 N.m and the holding brake delivers 3 N.m of static retention — meaning the drive has roughly a 7× peak-to-nominal torque margin for short acceleration events before the brake becomes the limiting static load. Nominal output power is 310 W at a 6000 rpm nominal speed, with a torque constant of 0.71 N.m/A referenced to a 248 °F (120 °C) thermal point and a back-EMF constant of 46 V/krpm at 68 °F (20 °C), so sizing the PacDrive 3 amplifier around the 1.55 A continuous stall current and 5.7 A Irms peak gives a comfortable margin on the windings. Stator resistance is 10.4 Ohm phase-to-phase at 20 °C (7.23 Ohm phase-to-neutral at 120 °C) and stator inductance 38.8 mH phase-to-phase at 20 °C, the values a commissioning engineer needs to confirm current-loop bandwidth and short-circuit protection behaviour at the drive output.

Mechanical envelope, shaft loads, and panel-side fit

Overall length is 8.6 in (219 mm) on a 2.8 in (70 mm) flange with a 0.4 in (11 mm) shaft of 0.9 in (23 mm) usable length, an 0.7 in (18 mm) key, and four 0.2 in (5.5 mm) mounting holes on a 60 mm centring collar — a footprint that drops directly onto the standard PacDrive 3 ILM machine-builder baseplate pattern. Maximum radial load Fr is derated from 660 N at 1000 rpm down to 360 N at the 6000 rpm nominal speed, and axial load Fa is constrained to 0.2 × Fr, which sets the belt or coupling preload budget when the motor is mounted away from the gearbox.

MPN
ILM0701P21F0000