Skip to main content
Schneider Electric ILM0702P22F0000

Schneider ILM0702P22F0000 servo motor, 720 W, IP65

MPN ILM0702P22F0000
Active

Schneider Electric PacDrive 3 ILM integrated servo drive motor, 70 mm flange, 720 W, 6000 rpm, 1.15 N.m nominal torque, IP65, absolute multiturn SinCos Hiperface feedback, ILM0702P22F0000.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0702P22F0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP65
Length9.9 in (252 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

Where this motor lands on the machine

The ILM0702P22F0000 is a Schneider Electric PacDrive 3 ILM integrated drive motor — the drive electronics sit on the back of the motor rather than in a separate cabinet, so the loop between position feedback and the power stage stays short and the cabinet build drops one component. It is sized for the compact axis: a 2.8 in (70 mm) flange, 9.9 in (252 mm) overall length, 0.7 in (18 mm) key width on an untapped 0.4 in (11 mm) shaft with no second shaft end — the mechanical envelope that typically drives a small-format indexing table, a labelling head, or a packaging-format servo. International standard flange mounting with four 0.2 in (5.5 mm) holes and a 2.4 in (60 mm) centring collar mean the motor drops onto the common NEMA-style footprint without a custom adapter plate.

Headline ratings and what they mean at the load

Continuous torque is 1.15 N.m (10.18 lbf.in) at a nominal 6000 rpm, drawing 1.5 A line current with 720 W of continuous shaft output — that is the operating point the servo drive loop is sized around, not the peak. Peak stall torque is 7.6 N.m (67.3 lbf.in), so the motor can deliver roughly six times nominal torque for the acceleration pulse; the drive limit at 11.8 A Irms is what caps how long that pulse can be held before thermal foldback starts. Continuous stall torque of 1.7 N.m (15.05 lbf.in) at 2.5 A tells the integrator how much torque is available at zero speed with the winding hot — relevant when the axis has to hold position against a static load, for example a vertical format change-over. Back EMF constant of 48 V/krpm at 20 °C and stator resistance of 4.2 Ohm Ph/Ph at 20 °C set the bus-voltage headroom — a 320 VDC PacDrive bus keeps the motor safely out of field-weakening across the full 6000 rpm speed range.

Feedback, brake, sealing, and cooling

Absolute multiturn SinCos Hiperface feedback is the single-cable resolver-equivalent that keeps absolute position on power-up without a homing routine — worth noting for any machine where a lost home position on restart costs a full format change. A holding brake is fitted (3 N.m / 26.6 lbf.in), so the axis can be held in position with the drive stage de-energised; sizing the brake torque against the load inertia is the integrator's call, not the motor's. Cooling is natural convection — no integrated fan — so the motor relies on the flange to dump heat into the machine structure; in a sealed enclosure the continuous torque figure above needs to be derated against the ambient. IP65 sealing at the body means the motor tolerates dust and low-pressure water jets, which covers most washdown-adjacent packaging lines but stops short of the high-pressure cleaning that would call for IP67.

Rotor inertia and shaft loading limits

Maximum radial force Fr drops from 710 N at 1000 rpm to 390 N at 6000 rpm, and maximum axial force Fa is limited to 0.2 × Fr — these curves are the ones to check against a pulley or pinion mounted on the shaft overhang, not the headline torque figure.

MPN
ILM0702P22F0000