Skip to main content
Schneider Electric ILM0703P31F0000

Schneider Electric ILM0703P31F0000 ILM servo motor, 720 W

MPN ILM0703P31F0000
Active

Schneider Electric PacDrive 3 ILM servo motor integrated drive, 70 mm flange, 720 W nominal output, 1.15 N.m nominal torque, IP65, SinCos Hiperface feedback, keyed shaft with holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0703P31F0000 specifications
ParameterValue
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP65
Length11.5 in (293 mm)
Shaft diameter0.6 in (14 mm)
Max axial force fa n0.2 x Fr
Centring collar diameter2.4 in (60 mm)

Product details

PacDrive 3 ILM, 70 mm frame, holding brake fitted

The ILM0703P31F0000 is a Schneider Electric PacDrive 3 ILM-series servo motor with integrated drive, built around a 70 mm flange and a 14 mm keyed shaft that comes with the holding brake already fitted and a single-turn SinCos Hiperface absolute feedback device on the back end. Body length is 11.5 in (293 mm) on a 3-stack stator with an international-standard flange — the four 5.5 mm mounting holes sit on the 70 mm bolt circle around a 60 mm centring collar, which is the mounting surface a PacDrive 3 gearbox or pinion would normally mate against.

720 W output: 1.15 N.m nominal, 2.2 N.m continuous stall, 8.7 N.m peak

Continuous output is rated 720 W with a nominal torque of 1.15 N.m at the 6000 rpm nominal speed — that maps to the standard duty point integrators use when sizing a packaging-line axis or a small-format converting station. Continuous stall torque reaches 2.2 N.m at 3 A and the motor can deliver 8.7 N.m of peak stall torque with the 12 A Irms ceiling — the ratio between peak and continuous is the headroom reserve for short acceleration bursts, not the rating a buyer should pick steady-state loads against. The 0.76 N.m/A torque constant at 120 °C and 49 V/krpm back-EMF constant at 20 °C define the loop: a 1 A command produces 0.76 N.m, and the back-EMF scales linearly with rotor speed, which matters when sizing the DC-bus voltage margin for the fastest axis in the machine.

IP65 sealed body, natural convection — no fan, no ducting

Cooling is natural convection only, so the IP65 sealing holds around the body without the maintenance burden of a fan or filter — the housing shrugs off the washdown, coolant mist, and dust load that food-packaging and pharma-converting lines put on a motor every shift. Shaft loading is documented by speed — radial force Fr derates from 730 N at 1000 rpm down to 400 N at 6000 rpm, and axial force Fa is capped at 0.2 times Fr; that envelope is what a coupled pinion or a right-angle gearbox can be expected to push back at the shaft without bearing wear escalating.

Lifecycle status and contract-build sourcing posture

For a contract build running three client AVLs off the same line, the sourcing posture is the binding issue: this is a Schneider-only part on the spec, so any alternate would need a written deviation from the end-customer before a second-source could be tested in. The pack size is one motor per unit, and the BOM line is set at the 720 W / 70 mm frame — confirm the input current (1.5 A nominal, 12 A peak) against the cabinet feed and the brake torque (3 N.m at the holding brake, distinct from the 1.15 N.m shaft nominal) against the axis's static-load expectation before committing the PO.

MPN
ILM0703P31F0000