Skip to main content
Schneider Electric ILM1401P31A0000

Schneider Electric ILM1401P31A0000 Servo Motor, 4.6 N.m

MPN ILM1401P31A0000
Obsolete

Schneider Electric PacDrive 3 ILM series servo motor integrated drive, model ILM1401P31A0000, 140 mm flange, 4.6 N.m nominal torque, 27 N.m peak stall, 1450 W, IP65, Hiperface feedback, keyed shaft, no brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1401P31A0000 specifications
ParameterValue
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP65
Length10 in (254 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2210 N 1000 rpm 1760 N 2000 rpm 1530 N 3000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

Device identity and PacDrive 3 positioning

ILM1401P31A0000 is a servo motor with an integrated drive from Schneider Electric, carrying the ILM short name within the PacDrive 3 range. The 140 mm flange and integrated-drive form factor place it as a mid-frame PacDrive 3 axis — sized for machine builders who want the drive electronics co-located with the motor rather than in a separate cabinet. Lifecycle status is recorded as current by the manufacturer, so PacDrive 3 ILM is not a phase-out line at this writing — any substitution onto a non-Schneider equivalent would need a deviation request against the customer AML rather than being treated as a routine alternate.

Torque, speed and current envelope

Continuous torque is 4.6 N.m nominal (40.7 lbf.in) and 7.5 N.m continuous stall, with a peak stall of 27 N.m for acceleration margin — sizing the load inertia against peak stall rather than nominal is what keeps the drive out of the current-limit foldback region during index moves. Nominal mechanical output is 1450 W at 3000 rpm nominal speed, with line-rated current of 2.9 A and a maximum Irms of 18.8 A available transiently — the 4.7 A continuous stall current versus the 2.9 A nominal figure confirms the motor is thermally framed around its rated operating point rather than stall.

Motor electrical constants and feedback

Back-EMF constant is 108 V/krpm at 20 °C and torque constant is 1.6 N.m/A at 120 °C — the torque constant figure is published at the operating hotspot, so the 20 °C-to-120 °C delta has to be accounted for in any cold-start torque trim. Stator resistance is 1.81 Ohm phase-to-phase at 20 °C and stator inductance 19.1 mH phase-to-phase at 20 °C, with the phase-to-neutral figures published at 120 °C — those numbers feed the drive's current-loop tuning and the I²R loss budget at sustained duty. Position feedback is an absolute single-turn SinCos Hiperface device with 128 periods of resolution, so the absolute position is retained through power cycles without a homing routine on every restart — important on machines where the operator expects the axis to resume at the last commanded position.

Mechanical envelope, shaft and mounting

Flange size is 140 mm (5.5 in) with a 254 mm (10 in) body length, a 24 mm (0.9 in) keyed shaft 50 mm long, and no brake and no second shaft end — the keyed-only configuration means any holding-torque requirement on a vertical axis has to come from the drive's regenerative stop rather than a fail-safe mechanical brake. Mounting is an international standard flange with four 11 mm mounting holes and a 130 mm centring collar 3.5 mm deep — for machine builders, that footprint matches the standard IEC 140-frame bolt pattern, so no adapter plate is needed when replacing another 140-frame servo on a rebuild.

Shaft loading, thermal and sealing

Maximum radial force Fr is rated 2210 N at 1000 rpm, derating to 1760 N at 2000 rpm and 1530 N at 3000 rpm — for a belt or pinion drive the higher end of the speed range is what actually sets the bearing-life budget, so the 1530 N figure at 3000 rpm is the one that governs a directly-coupled application running at nominal speed. Axial load Fa is limited to 0.2 × Fr, and cooling is natural convection rather than forced air — vertical or horizontal mountings with restricted airflow around the housing need a thermal verification, because the absence of a fan means the housing has to dissipate the full I²R loss through the flange and free convection.

Sourcing posture for PacDrive 3 ILM

The part is recorded at current; there is no L*-entry successor or phase-out notice on file. For contract-manufacturing builds, that means it stays on the customer's approved-vendor list without a deviation — quoting to order against the BOM through independent distribution keeps the build on the AML until a future EOL is published.

MPN
ILM1401P31A0000