Skip to main content
Schneider Electric ILM1402P02A0000

Schneider Electric ILM1402P02A0000 PacDrive 3 Servo Motor

MPN ILM1402P02A0000
Active

Schneider Electric PacDrive 3 ILM servo motor integrated drive, 140 mm flange, 9.1 N·m nominal torque, 55 N·m peak, 1910 W, IP54, multiturn Hiperface feedback.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1402P02A0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP54
Length12.2 in (309 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2430 N 1000 rpm 1930 N 2000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

What this motor is, and where it sits on the line

The ILM1402P02A0000 is a Schneider Electric PacDrive 3 series servo motor with an integrated drive, sized as the mid-frame member of the ILM family at a 140 mm flange. It is the kind of part you see in the back of a packaging machine or a high-speed indexing table — a self-contained motor/drive package that takes fieldbus commands and closes the torque loop on its own without a separate amplifier cabinet.

Torque, speed, and what that envelope means on the shaft

Continuous output power is 1910 W and the line-side current is 3.7 A nominal — the peak Irms of 24 A is the short-duration figure the drive will command during acceleration, not the cable-sizing number. The torque constant of 2.6 N·m/A at the 120 °C winding temperature is the working point the drive tunes to once the motor is hot; cold-loop constants look better but don't reflect steady-state behaviour. Back EMF constant of 173 V/krpm at 20 °C means the motor regenerates roughly that voltage per 1000 rpm — above the bus voltage threshold the drive's braking chopper (or an external resistor, sized by the original Schneider documentation) is what bleeds that energy on a fast stop.

Feedback and electrical constants

Feedback is an absolute multiturn SinCos Hiperface encoder at 128 periods of resolution — this is the part that lets the drive know shaft position on power-up without a homing move, which matters on a machine that loses orientation on every E-stop. Stator resistance is 1.9 Ω phase-to-phase at 20 °C and 1.32 Ω at the 120 °C hot winding; stator inductance is 22 mH at 20 °C and 11 mH at hot. Those two figures are what the auto-tune loop measures during commissioning, and they're the reason the motor's cold-resistance check at the cabinet terminals won't read the same value twice. Ten poles and two motor stacks — that pole count is what drives the electrical frequency at a given mechanical speed, and it determines whether the drive's current loop bandwidth is achievable on this frame without hitting the field-weakening ceiling.

Mechanical mounting and load limits

It's an international-standard flange mount with a 140 mm flange, four mounting holes at 11 mm diameter, and a centring collar at 130 mm by 3.5 mm deep. The shaft is 24 mm diameter by 50 mm long, untapped, with no second shaft end and no holding brake — so any brake in the system has to come from the gearbox side, and the coupling has to be keyed or clamp-style rather than tapped onto the shaft. Key width is 40 mm. Maximum radial load Fr is 2430 N at 1000 rpm and drops to 1930 N at 2000 rpm — that is the figure the belt or coupling manufacturer needs, not the bearing's generic catalogue rating. Maximum axial force Fa is constrained to 0.2 × Fr, so any thrust load from a pinion or worm has to be backed off with an external bearing arrangement before it reaches the motor face. Overall length is 12.2 in (309 mm) — that figure is what the cabinet layout has to clear, including the bend radius for the hybrid cable at the back.

Cooling, sealing, and lifecycle status

Cooling is natural convection — no integrated fan, no water jacket — which puts this motor in the IP54 category for sealing rather than the IP65/IP67 washdown ratings you'd see on a fan-cooled or food-grade frame. That rating means dust-protected and splash-resistant, suitable for an enclosure or a sheltered machine zone; it does not survive a direct hose-down. Lifecycle stage is current on the Schneider Electric record, with no official successor cross-referenced in the data we hold for this MPN. Production status on the manufacturer's own record is the controlling number; the unit is sourced to order through independent distribution and quoted against the BOM quantity at RFQ.

MPN
ILM1402P02A0000