Skip to main content
Schneider Electric LX0FK011

Schneider TeSys F LX0FK011 Contactor Coil, 415 V AC

MPN LX0FK011
Active

Schneider Electric TeSys F contactor coil, LX0FK011, 415 V AC 50/60 Hz control circuit, latching resistance 112.06 Ohm at 20°C, 1 Mcycles mechanical durability.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FK011 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage415 V AC 50/60 Hz
Mechanical life cycles1 Mcycles
Operating time50...100 ms unlatching 40...80 ms latching

Product details

The LX0FK011 is a replacement contactor coil from the TeSys F range, designed to drive the main contactor in a motor starter or switching assembly. It operates on a 415 V AC 50/60 Hz control circuit, with the latching coil drawing 112.06 Ohm and the unlatching coil measuring 13256 Ohm at 68 °F (20 °C). This is a service part — category 18401-WORLD SERVICE PARTS(CTR ACCESS) — meaning it is stocked as a critical spare for installed TeSys F contactors. If you have a TeSys F contactor with a failed coil, this is the direct drop-in replacement.

The control circuit voltage is 415 V AC 50/60 Hz, with voltage limits of 0.85 to 1.1 Uc for both latching and unlatching. That means the coil will reliably pick up and drop out between roughly 353 V and 457 V — important when sourcing from a line that may sag under load. Operating time is 50 to 100 ms unlatching and 40 to 80 ms latching. For a contactor coil, this is standard — the unlatching time is the dropout delay, which governs how fast the main contacts open on a control signal loss. If your safety circuit timing relies on a faster dropout, verify this window against your requirements. At 120 cyc/h, that is one operation every 30 seconds — adequate for most motor starting duty, but not for high-speed jogging or rapid cycling applications.

MPN
LX0FK011