Skip to main content
Schneider Electric LX1D2U7

Schneider LX1D2U7 TeSys contactor coil, 230-240 VAC

MPN LX1D2U7
Obsolete

Schneider Electric TeSys D LX1D2U7 contactor coil, 230-240 V AC 50/60 Hz, 645 ohm coil resistance, 70 VA inrush / 8 VA hold-in, for 9 to 18 A contactors.

$32.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D2U7 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage240 V AC 60 Hz 230...240 V AC 50 Hz

Product details

What this coil fits and why the VA matters

The LX1D2U7 is a replacement coil for TeSys D contactors rated 9 through 18 A — the LC1D09 through LC1D18 frame sizes. It pulls 70 VA inrush at pickup (cos φ 0.75) and settles to 8 VA sealed (cos φ 0.3). That inrush-to-hold ratio is typical for AC-operated contactor coils; the control transformer or PLC output driving it must supply the 70 VA peak without voltage sag, or the contactor may chatter on pull-in. Coil resistance measures 645 Ω at 20 °C, and the closed-circuit inductance is 25 H — the high inductance after the armature seats explains the low hold-in VA.

Obsolete — sourcing path

Schneider has marked the LX1D2U7 as obsolete. No official successor order code is listed on the manufacturer record. The coil is available through independent surplus and new-old-stock channels; quantities are lot-specific and confirmed at RFQ. For a panel with an existing TeSys D contactor needing a coil swap, the LX1D2U7 is the direct fit — same mechanical interface, same terminal layout. No pin-compatible alternative from Schneider has been published for this voltage variant.

MPN
LX1D2U7