Skip to main content
Schneider Electric LXMRSP0670200

Schneider Electric LXMRSP0670200 SCARA Robot

MPN LXMRSP0670200
Active

Schneider Electric Lexium SCARA robot, 4-axis, 700mm arm + 200mm stroke, 0.02mm repeatability J1/J2, 0.9 kW rated, tabletop mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXMRSP0670200 specifications
ParameterValue
Main product or component typeSCARA robot
Input voltage170...250 V AC without derating 100...170 V AC with derating of 15%
IP ratingIP20 / IP65
Temp storage max60 °C
Temp storage min-20 °C
Temp operating max60 °C
Temp operating min-20 °C
Storage temperature-4...140 °F (-20...60 °C)
Operating positionRotational 360°
Operating temperature32...104 °F (0...40 °C)

Product details

Repeatability and workspace — the motion profile

The LXMRSP0670200: Repeatability of ±0.02 mm on J1 and J2 is the figure that decides fit for precision pick-and-place and assembly — the robot holds the micron across the full horizontal reach. J3 adds ±0.01 mm vertically and J4 holds ±0.01° on rotation, so a 4-axis datum stays tight through a full wrist sweep. Workspace is J1 ±130°, J2 ±149°, J3 200 mm vertical stroke, J4 continuous 360° — the ±149° on J2 extends the arm's reach arc on the outer side of the envelope compared to a symmetric ±130° J2, giving more usable reach in a compact tabletop footprint. Maximum combined actuation speed of 8450 mm/s J1+J2 and 1100 mm/s on J3 sets the cycle-time ceiling — the 2150 °/s J4 angular speed keeps wrist reorientation from stalling the pick-and-place cadence at full payload.

Payload and electrical ratings

Rated power is 0.9 kW with a 2 kW peak — the margin between rated and maximum tells you the servo loop has headroom for short-duration accelerations without tripping the drive, but continuous operation above 0.9 kW will push into the derating profile. Input accepts 170–250 V AC without derating and 100–170 V AC with 15 % derating — a line dip that drops below 170 V triggers the derating window, so in regions with unstable mains the robot's speed and payload ratings drop by that margin automatically.

Environment and enclosure

IP20 standard; IP65 requires the conformity kit — if the cell demands washdown or dusty environments the kit is not optional, it is the sealing solution, and the base unit alone does not meet IP65 without it. Operating ambient is 0–40 °C — above that the drive thermal margin shrinks, and at altitude above 1000 m the 10 % per 500 m performance derating kicks in, so a machine builder running this at 1500 m should budget the full derated speed and payload rather than the datasheet headline. Noise level is 70 dB — this is the full-cell figure under load, not an idle reading, so the acoustic environment in the immediate workspace of the robot is what this number governs, not a cabinet measure.

MPN
LXMRSP0670200