Skip to main content
Schneider Electric MH30701P06F2200

Schneider Electric MH30701P06F2200 Servo Motor with Brake

MPN MH30701P06F2200
Obsolete

Schneider Electric MH30701P06F2200, MH3 series servo motor with holding brake, 930 W continuous, 3-phase, IP65, single-turn SinCos Hiperface encoder, smooth shaft, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P06F2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length6.3 in (161 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

930 W continuous power — sizing the drive match

The MH30701P06F2200 delivers 930 W continuous power from a three-phase supply, which sets the minimum drive current rating. The continuous stall current is 1.78 A, and the maximum RMS current hits 5.97 A — the drive's continuous and peak output must cover both numbers without tripping into current limit.

Holding brake and encoder — what's built in

The holding brake delivers 3 N·m holding torque and pulls in at 7 W. That brake holds the load on a vertical axis when power drops — no external mechanical brake needed. The brake release voltage must match the drive's brake control output; the 7 W coil is a DC solenoid, so the drive's brake chopper or external relay handles the switching. Feedback comes from a single-turn SinCos Hiperface encoder. This is an analog sine-cosine encoder with a serial comms channel for position data — it works with Schneider LXM52/LXM62 drives natively, and with third-party drives that support the Hiperface protocol. Single-turn means absolute position within one revolution; multi-turn applications need a different encoder option.

IP65 enclosure and shaft — washdown-ready

IP65 standard means the motor body is dust-tight and protected against low-pressure water jets from any direction. That's enough for washdown in food processing or wet machining lines, but not for submersion or high-pressure spray (IP66/IP67 would cover that). Smooth shaft, 11 mm diameter, 23 mm length — no keyway. The smooth shaft means the coupling or pulley clamps onto the shaft with a set-screw or friction lock; no keyseat to align. The 70 mm flange (2.8 in) is an international standard flange, so it bolts to common gearbox and mounting brackets without adapters.

Thermal limits and torque derating

The torque constant is 0.79 N·m/A at 120 °C copper temperature — that's the hot-winding value, not the cold start. Continuous stall torque is 1.4 N·m across the 115–480 V range, and peak stall torque hits 4.2 N·m. The stator resistance is 8.28 Ω and inductance 23.4 mH; the drive's current loop gains should be tuned for these values, especially on longer motor cables where the cable capacitance adds to the load. Natural convection cooling — no fan. The 930 W continuous rating assumes free air around the motor body; mounting it in a confined space or against a heat sink reduces the duty cycle. Maximum mechanical speed is 8000 rpm, but the torque available above 3000 rpm drops as the radial force limit tightens (460 N at 3000 rpm vs 360 N at 6000 rpm).

MPN
MH30701P06F2200