Skip to main content
Schneider Electric MH30701P07F2200

Schneider Electric MH30701P07F2200 Servo Motor, 930 W

MPN MH30701P07F2200
Active

Schneider Electric MH30701P07F2200 servo motor with brake, 930 W continuous power, 5500 rpm nominal speed, 1.38 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P07F2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length6.3 in (161 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

The MH30701P07F2200 is a 930 W continuous-power servo motor from Schneider Electric's MH3 series, spinning at 5500 rpm nominal. That speed puts it in the high-speed class — good for direct-drive spindles, packaging cutoffs, or any axis where you want to skip a gearbox and run the load at motor speed. Nominal torque is 1.38 N.m when paired with an LXM52 drive at 115 V three-phase input, and it derates slightly to 1.27 N.m at 480 V three-phase. The peak stall torque hits 4.2 N.m across the 115–480 V three-phase range — that's the short-term muscle for acceleration through a cycle. The holding brake delivers 3 N.m static torque, enough to hold a vertical load or keep a position on power loss without the drive holding current. Brake pull-in power is 7 W — small enough that the holding brake won't cook the motor in a stalled condition.

Encoder feedback and sealing — field-install realities

The Multiturn SinCos Hiperface encoder gives absolute position over multiple revolutions, so the controller knows the shaft angle at power-up without a homing move. That saves a few seconds per cycle on machines that cycle power between batches. IP65 rating means the motor body and the connector interface are sealed against hose-directed water — fine for washdown zones in food plants or outdoor conveyor sections. The shaft seal is the weak point at sustained high rpm; the radial force limits drop from 660 N at 1000 rpm to 360 N at 6000 rpm, so a belt-driven load at top speed needs a bearing check. Natural convection cooling — no fan, so the motor relies on its own surface area to shed heat. The continuous stall torque is 1.4 N.m across the voltage range, which is essentially the thermal limit at zero speed. If the duty cycle keeps the motor near stall, expect the 135 °C copper hot limit to be the binding constraint.

The motor mates with Schneider LXM52 and LXM62 drive families — the nominal torque figures in the spec table are measured with those drives at the stated input voltages. If you're replacing an existing motor in a Lexium system, verify the drive model and the feedback cable pinout before committing.

MPN
MH30701P07F2200