Skip to main content
Schneider Electric SH30552P11F2100

Schneider Electric SH30552P11F2100 Servo Motor with Brake

MPN SH30552P11F2100
Obsolete

Schneider Electric SH3 series servo motor, SH30552P11F2100, three-phase, 530 W continuous power, 6000 rpm at 400 V, with holding brake, absolute single-turn SinCos Hiperface encoder, IP65, 55 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH30552P11F2100 specifications
ParameterValue
Shaft end typeParallel key
Main product or component typeServo motor
Length7.1 in (181 mm)
Shaft diameter0.4 in (9 mm)
Max axial force fa n40 N
Max radial force fr n370 N 1000 rpm 290 N 2000 rpm 260 N 3000 rpm 230 N 4000 rpm 220 N 5000 rpm 200 N 6000 rpm 190 N 7000 rpm 190 N 8000 rpm
Centring collar diameter1.6 in (40 mm)

Product details

Motor ratings and supply-dependent performance

The SH30552P11F2100 is a three-phase servo motor from the Schneider SH3 family, rated for 530 W continuous power. Its nominal speed and torque shift with the supply voltage: at 400 V three-phase it delivers 6000 rpm and 0.63 N.m nominal torque; at 480 V three-phase the same 6000 rpm speed with 0.63 N.m nominal torque and 670 W nominal output power. Peak stall torque reaches 2.5 N.m across the 115–480 V three-phase range, giving short-term overload headroom for acceleration or load transients. Continuous stall torque is 0.71 N.m at the same supply range.

Feedback, mounting, and environmental fit

Encoder type is absolute single-turn SinCos Hiperface — a digital/analogue hybrid feedback that reports absolute position within one revolution at power-up, no homing sequence needed. The drive must support Hiperface protocol; this is common on Lexium and other servo drives that accept SinCos encoders. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 means it withstands dust ingress and low-pressure water jets — suitable for washdown areas or dusty production floors. Cooling is by natural convection; no external fan or coolant circuit required.

Electrical connection and sourcing posture

The electrical connection uses a rotatable right-angled connector — the cable exit angle can be adjusted in the field to suit tight cable-tray routing or panel entry. Stator resistance is 17.4 Ohm and stator inductance is 53.54 mH, which the drive tuning algorithm uses for current-loop gains.

MPN
SH30552P11F2100