Skip to main content
Schneider Electric ATV1200A44406666

Schneider Electric ATV1200A44406666 AC Drive, 3712 kW

MPN ATV1200A44406666
Active

Schneider Electric Altivar 1200 ATV1200A44406666 medium-voltage AC drive, 3712 kW motor power, 2970-3630 V input, 36-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A44406666 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current410 A
IP ratingIP41 / IP31 / IP42
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (standard efficiency) 1800 mm (high efficiency)
Width6670 mm (standard efficiency) 6970 mm (high efficiency)
Height2740 mm standard efficiency 3040 mm high efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Medium-voltage drive for large asynchronous motors

The ATV1200A44406666 is a Schneider Electric Altivar 1200 series medium-voltage AC drive rated for 3712 kW motor power at 2970-3630 V input. It uses a 36-pulse diode rectifier bridge to reduce line-side harmonics below IEEE 519 thresholds without external filters. This drive is designed for large asynchronous motors in applications such as pumps, fans, compressors, and conveyors where medium-voltage power conversion is required. The floor-standing enclosure with separate air flows supports installation in industrial electrical rooms.

Input power and harmonic performance

The 36-pulse topology draws 410 A line current at 4440 kVA apparent power, delivering clean input current with low total harmonic distortion. Prospective line short-circuit current withstand is 31.5 kA for 150 ms, which sets the upstream protection coordination requirement. Supply voltage limits span 2970-3630 V, accommodating typical 3.3 kV industrial distribution systems. The integrated EMC filter meets EN/IEC 61800-3 conducted emission limits without add-on components.

Overload capability and motor protection

Standard overload withstand is 1.2 In for 60 s and 1.5 In for 3 s; high overload mode extends to 1.5 In for 60 s and 1.85 In for 3 s. These profiles allow the drive to handle motor starting and transient overloads without nuisance tripping while coordinating with upstream protection. Ground fault protection is built into the drive, and dielectric strength between earth and power terminals is 20 kV AC. Pollution degree 2 per EN/IEC 61800-5-1 applies for normal industrial environments.

Physical footprint and site planning

The floor-standing enclosure measures 2740 mm high by 6670 mm wide by 1700 mm deep in standard efficiency configuration; high efficiency adds height to 3040 mm and depth to 1800 mm. Operating position is vertical within ±10 degrees. Forced convection cooling moves 49800 m³/h of air, with a noise level of 80 dB. The cooling fan requires a 380 V AC supply; control electronics need 220 V AC at 3 kVA. Altitude derating applies above 1000 m at 0.6 % per 100 m up to 2000 m.

Control I/O and integration

Four software-configurable analogue inputs accept 0-20 mA or 4-20 mA signals at 24 V max with 250 Ohm impedance. Two analogue outputs mirror the same current ranges. Six discrete inputs are standard, expandable to ten with an option. Electrical isolation between power and control circuits is maintained. The human-machine interface is included as part of the product composition, which also comprises the phase-shifting transformer, power cells, cooling fans, and medium-voltage arrestors.

Compliance and lifecycle

CE marked and compliant with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Overvoltage category II applies per the power interface standard.

MPN
ATV1200A44406666